Panasonic Sets New Solar Cell Efficiency Record of 25.6%

Panasonic has a long history of breaking solar efficiency records. The company recently announced that it has broken an efficiency record again.
Its HIT solar cell has achieved a conversion efficiency of 25.6%, a new world record and “a major increase over the previous world record for crystalline silicon-based solar cells,” as Panasonic notes.
Notably, that previous record was also set by Panasonic. Back in February 2013, we announced that the company’s HIT solar cell had hit an efficiency of 24.7%.


“The achievement of this new record was made possible by further development of Panasonic’s proprietary heterojunction technology to realize the high conversion efficiency and superior high temperature properties of the company’s HIT solar cells as well as adopting a back-contact solar cell structure, with the electrodes on the back of the solar cell, which allows the more efficient utilization of sunlight,” the company adds.

Here’s more:
Outline of the core technologies behind the record conversion efficiency

1. Reduction in recombination loss
A key feature of HIT technology is its ability to reduce the recombination loss of charge carriers, particles of electricity generated by light, through laminating layers of high-quality amorphous silicon on the surface of the monocrystalline silicon substrate, where power is generated. By utilizing the technology to form a high-quality amorphous silicon film on the monocrystalline substrate while minimizing damage to the surface of the substrate, it has been possible to realize a high temperature coefficient of -0.25% per degree Celsius which is able to maintain a high conversion efficiency even with high open circuit voltage (Voc) and at high temperatures.

2. Reduction in optical loss
In order to increase the current in a solar cell, it is necessary to lead the sunlight which arrive at the cell’s surface to the monocrystalline silicon substrate, which is the layer which generates the power with less loss. Placing the electrodes on the reverse as back contacts allows the light to reach the substrate more efficiently. This has led to a marked improvement in short circuit current density (Jsc) to 41.8mA/cm2 over Panasonic’s
previous figure of 39.5mA/cm2 (in the case of a cell with a conversion efficiency of 24.7%).

3. Minimizing resistance loss
In solar cells, the generated electrical current is accumulated in the surface grid electrodes and output externally. Previously, the grid electrodes on the light-receiving side were optimized by balancing the thickness of the grid electrodes (thinning the grid electrodes to reduce the amount of light blocked) and the reduction of electrical resistance loss, but by placing the electrodes on the reverse side, it has become possible to reduce the resistive loss when the current is fed to the grid electrodes. In addition, a high fill factor (FF)*13 of 0.827, has been achieved, even at a practical cell size by improving resistance loss in the amorphous silicon layer.
Of course, Panasonic isn’t done. It intends to break this record some day as well.

Image Credit: Panasonic

Source: Solarlove

About Ritesh Pothan

Ritesh Pothan, is an accomplished speaker and visionary in the Solar Energy space in India. Ritesh is from an Engineering Background with a Master’s Degree in Technology and had spent more than a decade as the Infrastructure Head for a public limited company with the last 9 years dedicated to Solar and Renewable Energy. He also runs the 2 largest India focused renewable energy groups on LinkedIn - Solar - India and Renewables - India
This entry was posted in Cells & Modules, Crystalline, PV, Renewables, Solar and tagged , , , , . Bookmark the permalink.